Reasons Why 2-Wire Irrigation Systems Are Making A Mark

It requires a little while for the landscape developers to trust modern models of irrigation technology, but conventional ones have prevailed. In the past years, 2 wire irrigation system has consistently been a competitor in the irrigation industry. Traditionally wired networks have been proved, and two-wire systems have not begun to pick up steam until the early 2000s. Today, it’s seen as useful, and consumers see the advantages.

Advances of information technologies have helped stimulate the popularity of this system. Two-wire networks have begun as a way to save costs on the wire. Now, by developing technologies, they are also offering a way to get even more data.

Innovations provide improvements to microprocessors and networking tools, such as WiFi—which helps contractors access these systems via the cloud.

Project Variations

Two-wire systems can be used in several locations and various projects, but some styles are specially configured to handle. Usually, two-wire structures make economic sense for developments designed in stages over any given period. Comprehensive residential, light industrial and commercial estate developments are also ideally adapted for two-wire schemes.

Installers will cap the wire at the end of phase one and add it in subsequent phases. You’ve got to map it out for a conventional device and wire it up from the start. Systems are also suitable for big master-planned cities.

Instead of using different functionalities, you could use a two-wire system to travel in any path long as you don’t reach the limits. In comparison, two-wire systems can operate longer on longitudinal sites compared to conventional methods. It is also necessary to know the maintaining current of the valves being used and the number of valves being worked simultaneously as part of the collection of proper wire sizes for a two-wire system. Awareness of customer and maintenance needs is a large part of the use of the monitoring system.

Privileges of using a two-wire irrigation system

These devices can have cost-effectiveness and implementation advantages. The primary explanation for using a two-wire system is that it takes less copper wire than the standard procedure, and the price of copper continues to increase. You’re potentially going to save 80 per cent on the wire for a two-wire device compared to the conventional one. It would also require a longer time to mount a two-wire system. Instead of installing a single pilot wire and standard looped wire on each valve, a pair of wires is all that is required.  When attaching the controller, the installers do not have to “tone” or “ring-out” wires because each valve has a configured decoder with the given number. Any two-wire networks may also be added to the overall cables already in the field. Other devices need a jacketed and twisted – pair cable of wires, so it’s imperative to inform oneself as part of your product range. Another benefit is that the building owner can monitor the whole operation from one station rather than frequent multiple stations.